Application - for the construction of advanced ceiling light fixtures, mounted to the surface or suspended where surface mounting is difficult. Assembly - comfortable and reliable assembly - the possibility of using self-tapping screws Additional information - the MOD-50 lighting fixture can be anodized or painted. The MOD-50 lighting fixture can generate a strong downward beam (two LED strips 10 mm wide or a single firm LED module up to 24 mm wide) and an upward backlight beam (one 10 mm LED strip) - the MOD-50 lighting fixture is designed so that its "core" (extrusion with LED strips, power supply, wires) can be fully prepared in advance (in factory conditions). At the destination of mounting, the ready "core" of MOD-50 can be snapped into the previously mounted housing frame and connected to power - for each 1m of the lighting fixture, two locking bolts must be used. With lighting fixtures shorter than 1 m, at least 2 bolts must be used The MOD-50 lighting fixture is compatible with the following covers: - JUN-50 prismatic, material: PMMA, length: 1.5 m, UV resistant , the possibility of obtaining a glare factor UGR ? 19 - POL-50 frosted, material: PC, lengths: 1 m, 2m, 3 m, UV resistant The covers must be cut 2mm shorter than the aluminum profiles on each end (so that there are 2mm gaps at both ends of the fixture). |
---|
Supplier of high-end lighting solutions to the Australian and New Zealand architecture and design community.
Share the lightbox using the following public link. Any changes you make to this lightbox will automatically be reflected this shared link.