Application - construction of watertight, ground lighting fixtures inside and outside buildings (walkways, car parks, driveways) Assembly - mounted on spacer foam in a prepared gap in the hardened surface (e.g. paving stones) - the remaining gap is filled with sand Additional information - possibility of making a linear fixture with IP67 protection, which means the fixture is dustproof and waterproof. - possibility of making a linear fixture with IP66 protection, which means the fixture is waterproof in contact with strong water jets. - possibility of making a linear fixture with IP68 protection, which means the fixture is dustproof and waterproof - also under pressure. It stays functional when continuously submerged up to 3m. - possibility of making a linear fixture with IK10 degree of protection against mechanical impact, which means that the fixture can withstand an impact of a 5kg weight dropped from a 40cm height with 20J energy. - water-tight splitters and couplers are used to run the cables powering the light fixture in the ground |
---|
IP Rating |
|
Control Gear |
|
Finishes |
|
B3579ANODA_2 | 2M HR-LINE PROFILE ANODISED | Not Favourited Not in current lightbox |
No products match filter criteria |
Supplier of high-end lighting solutions to the Australian and New Zealand architecture and design community.
Share the lightbox using the following public link. Any changes you make to this lightbox will automatically be reflected this shared link.